Boat Trailer Rollers and Bow Stops

Owning a boat can be an incredibly rewarding experience, providing a variety of enjoyable activities. Getting your boat to and from the water is an often-unheralded task that can gobble up precious time and often lead to dings and scrapes to your precious boating investment. That does not have to be the case. Stoltz Super Rollers can provide simple improvements to your boat trailer for easier launching, transporting and protection for your boat! Contact us today at stoltz@pcourethane.com to find out more.

 

Easy-Launching Rollers

Boat trailers often feature an insufficient number of rollers, ones that do not touch the boat or even no rollers at all. Many boat manufacturers recommend better support for the keel and transom as a way to further protect your investment. Adding a few of our keel rollers to a bunk trailer greatly reduces the effort needed to launch and retrieve your boat. It also shifts some of the weight from the carpeted bunk to the roller, providing a buffer between boat and trailer. Our rollers:

 

  • Improve support for the keel and transom during transport
  • Allow for easier boat launching and retrieval
  • Eliminate the need to submerge the trailer to float off the boat
  • Keep the tow vehicle safely off the slippery portion of the ramp
  • Reduce damaging friction between boat and trailer

 

The Power of Polyurethane

PVC and rubber rollers are often marketed as having similar qualities to polyurethane but at a cheaper price, however the material differences are far greater. Both rubber and PVC tend to split and break. PVC also gets harder as it ages, which can lead to markings and abrasions on the hull of your boat. Although they may cost more initially, polyurethane Stoltz Super Rollers provide superior protection over a longer lifetime, making them the more economical choice.

 

Advantages of Polyurethane vs. Rubber or PVC Rollers
  • Abrasion resistance
  • Non-marking, non-staining
  • Won’t split or crack, even in extreme cold
  • Longer, consistent performance
  • Will not flat spot after months of storage

 

Made in the U.S.A.

All Stoltz products are designed and manufactured in Marshfield, Wisconsin, U.S.A. using the highest quality polyurethane available for these applications.

 

If you would like to order our products on an individual basis, you may do so at the following web sites:

Bowstops

Part Number: V-2 (V bow stop, fits 2 inch bracket, 1/2 inch hole.)

Part Number: RP-3 (V bow stop, fits 3 inch bracket, 1/2 inch hole.)

Part Number: RP-404 (V bow stop, fits 4 inch bracket, 1/2 inch hole.)

Part Number: RP-33 (Bow roller, fits 3 inch bracket, 1/2 inch hole.)

Part Number: RP-335 (V roller, fits 3 inch bracket, 1/2 inch hole.)

Part Number: RP-336 (V roller, fits 3 inch bracket, 1/2 inch hole. For boats with less "V".)

Part Number: RP-435 (Small end bell. goes with RP-335)

Part Number: RP-325 (3 inch end cap for RP-33 and RP-335)

Part Number: RP-414 (V roller, fits 4 inch wide bracket, 1/2 inch hole.)

Part Number: RP-446 (Semi flat bow roller, fits 4 inch wide bracket)

Part Number: RP-355 (New 3.5 inch bow roller. 1/2" Hole Fits Shoreland'r trailers)

Part Number: RP-443 (V roller, fits 3 inch bracket, 1/2 inch hole.)

Part Number: RP-444 (V roller, fits 4 inch bracket, 1/2 inch hole.)

Part Number: RP-434 (End bell, use 1 on each side of RP-443 or RP-444 to create the Ultimate Bow Stop. 1/2 inch hole.)

Part Number: ULT-3 & 4 (Ultimate Bow Stop, complete set including mounting hardware. ULT-3 fits 3 inch wide bracket. ULT-4 fits 4 inch wide bracket.)

Part Number: ULT-336 (Ultimate Bow Stop, complete set including mounting hardware. ULT-336 fits 3 inch wide bracket. For boats with less "V")

Keel Rollers

Part Number: RP-85 (New Multi-Use Roller 7.5" long, 5" diameter. Fits 1" Shaft)

Part Number: RP-45 (Keel roller, fits 4 inch wide bracket. 1/2 inch hole.)

Part Number: RP-4 (Keel roller, fits 4 inch wide bracket, 5/8 inch hole.)

Part Number: RP-5 (Keel roller, fits 5 inch wide bracket. 5/8 inch hole.)

Part Number: RP-55 (Keel roller, fits 5 inch wide bracket. 1/2 inch hole.)

Part Number: RP-504 (Keel roller, fits 5 1/2 inch wide bracket. 5/8 inch hole.)

Part Number: RP-7 (Keel roller, fits 7 inch wide bracket. 5/8 inch hole.)

Part Number: RP-8 (Keel roller, fits 8 inch wide bracket. 5/8 inch hole.)

Part Number: RP-10 (Keel roller, fits 10 inch wide bracket. 5/8 inch hole.)

Part Number: RP-310 (3 x 10 inch flat roller, 5/8 inch hole.)

Part Number: RPSC-12 (Self-centering keel roller, fits 12 inch wide bracket. 5/8 inch hole.)

Part Number: RP-12 (Keel roller, fits 12 inch wide bracket. 5/8 inch hole.)

Part Number: RP-18 (Keel roller, fits 18 inch wide bracket. 5/8 inch hole.)

Miscellaneous

Part Number: RP-448 (4" Guide Roller Fits 4" wide bracket and 1/2" shaft. Used for cable, chain, rope or hose up to 3" diameter.)

Part Number: RP-32 (3 1/4 inch diameter end cap for RP-8, 10, 12, and 18. 5/8 inch hole.)

Part Number: RP-212 (2 1/2 inch diameter flat roller, fits 12 inch bracket, 5/8 inch hole.)

Part Number: RP-22 (End cap or tip roller for RP-212. 5/8 inch hole.)

Part Number: RP-42 (4 inch diameter, 2 inch wide, 1/2 inch hole.)

Part Number: RP-31(3 1/4 inch diameter, 1 1/2 inch wide roller, fits 1/2 inch shaft.)